Products
Dial-a-Flow Regulators 2000 Series
Select Model (4):
Model 2001 Dial-a-flow Regulator-C10-Brass NP
The Dial-A-Flow regulator uses a single stage design which give the end user a series of preset constant flow rates. The Dial on the top of the regulator is to be used to manually change the flow rates. Used for calibration gases and handheld gas detectors.
Materials of Construction
| Part | Material |
|---|---|
| Body | Stainless Steel |
| Neck | Aluminum Black Anodized |
| Piston | Brass |
| Seats and Seals | Teflon, Viton & Buna-N |
| Bonnet | Aluminum Black Anodized |
| Seals | Viton |
Flow Rate Options
| Option | Flow Rate |
|---|---|
| 1 | 0-0.3-0.5-1.0-1.5-2.0-2.5-3.0-5.0-6.0-7.0-8.0 L/Mn |
| 2 | 0-0.15-0.3-0.5-0.75-1.0-1.25-1.5-1.75-2.0-2.5-3.0 L/Mn |
| 3 | 0-0.5-1.0-1.5-2.0-2.5-3.0-5.0-6.0-7.0-10.0-15.0 L/Mn |
| Model | 2001 |
|---|---|
| Maximum Inlet Pressure | 0 to 1200 psig / 83 bar |
| For Reactive Gases and/or Non-reactive Gases | Brass NP for non-reactive gases |
| Flow Rates | Refer flow rate table |
| Inlet Connection | 5/8" x 18UN C10 |
| Outlet Connection | 3/16" Barb 4.8mm |
| Inlet Gauge | Brass 0 to 1500 psig 103 bar |
| Weight Kg | 0.350 Kg |
Warranty: All regulators are warranted for 12 months.
